Wheel hub CNC lathe processing attention to the operation details
    First, the hub of the CNC lathe before processing the details of the inspection equipment. Before the equipment starts to work, habitually check the fuselage and electrical pipelines, especially the external auxiliary equipment of the hydraulic, air pressure two systems. Check the amount of hydraulic fluid, air compressor and gas pressure vessel, there is no accumulation of excess water, to prevent the machine parts are accumulated moisture corrosion rust.
    Second, the use of hub CNC lathe equipment to start the order of power. Be sure to follow the order in which the device is used to start the power supply. First turn on the main power supply. Finally, release the emergency stop button, you can reduce the impact on the CNC system electrical components. The operation of the equipment and equipment orderly, the individual components can work properly.
    Third, the use of CNC lathe processing to ensure adequate lubrication of parts. In order to ensure the normal operation of important parts, reduce the loss and prolong the service life of the machine. After each use of the equipment, the lubricating oil quantity of the lubricating device is checked regularly, and all the liquid filter, oil and oil The If there is not enough lubrication, machinery and equipment in the long-term operation, it will increase the friction resistance of parts and components, enhance machine power consumption, waste electricity consumption, accelerate the consumption of moving parts, and ultimately affect the quality of products produced.
    Taian sea number of machinery main products: horizontal inclined bed CNC lathes, vertical CNC lathes, CNC turning centers, CNC pipe thread lathes, CNC milling machines, CNC machining centers, the purchase of CNC lathes to select the number of sea, choose Su total right, order Phone 13953800780.
    More CNC lathe knowledge at http://qktw.cn/